10 Best Fabric Cutting Tables to Make Your Sewing Work Much Easier

By
Jean Chaney
Jean Chaney
Research Writer
Jean is the brains behind her fashion label. She's a whiz with a needle and thread, and has been sewing since she was old enough to hold a pair of scissors. Jean has always read more
reviewed
Reviewed By
Isabel Misner
Isabel Misner
Expert Consultant
A professional seamstress. Isabel has her own video blog where she shares her experience about all the aspects of sewing – from choosing suitable materials to step-by-step read more
Last updated: August 17, 2023
JustToSew is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

Whether you are sewing as a hobby or in a professional capacity, you might want to invest in one of the best fabric cutting tables rather than using your dining table. Of course, the cutting surface is much more resistant to damage. Also, some of them come with built-in yardsticks to make your measuring work much easier.

It is important to note that the ten products listed below are not the only ones we reviewed. Instead, the list only represents the top picks out of 24 products we reviewed. Of course, the Sullivans 38431 Home Hobby Adjustable Height Foldable Table stood out as a favorite for our team. Among its more endearing qualities are the adjustable surface size, height and even the inclusion of shelves. Of course, if you are looking for other benefits, one of the other nine products is likely to fit the bill.

Reviewing all 24 products was a very time-consuming exercise. Of course, it involved most of the manufacturer’s websites. Where that information was not enough, data from vendor sites was also added. Nevertheless, there are a few critical areas we focused on. Among them, the size of the table as it determines the cutting surface. Also, construction materials to assess durability. In addition to that, the weight and extra features could prove beneficial to users. Once we collected all the necessary information, we put it together in a ranking table below. Also, in-depth product reviews in the middle section may prove helpful. In addition to those two sections, there is a buying guide. All that’s left to do is choose the best fabric cutting table out of the options available.

Quick Summary

Top 10 Fabric Cutting Tables Review 2024

?
Consumer Engagement
Chosen by 9231 people in the past 30 days
9.8
Customer Feedback
Customer Feedback
9.7
Brand Reputation
Based onweb analytics
9.6
Features & Benefits
Product Review
9.5
9.8
Features
  • Dimensions: 59″ L x 35.8″ W x 29″ to 39″ H (open)
  • Weight: 68 lbs.
  • Weight limit: n/a
  • Construction materials: metal, MDF
  • Warranty: n/a

Other features: adjustable (29”-38”), integrated shelves for supplies and tools

You may have limited space in your apartment or workshop. As such, the Sullivans 38431 Home Hobby Adjustable Height Foldable Table is bound to impress you as soon as you see it.

The body features a steel frame for both durability and stability. On top of this metal frame, there is a laminated top that is as well very impressive.

As you can see in the name, these units are foldable. This means that the working surface can change from 29” to 38” depending on how big or small the user wants it.

Of course, this is not the only changeable parameter that the fabric cutting table has to offer. Another benefit is the adjustable height. This means that whether you want to use it while sitting or standing, you are free to do so.

The fact that it is foldable also does a bit to enhance the grooves present. Consequently, you should have quite an easy time cutting through fabrics with your scissors. After all, that is the reason you buy the cutting table in the first place.

It is also hard not to notice the presence of shelves under the cutting table. Here is where you store some of the accessories you use in your craft so that they are easily accessible. As such, you don’t need to move from the table until you are done with the project.

    What do we love it for?
  • Foldable
  • Adjustable height
  • Comes with shelves for storage of supplies
  • Sturdy metal frame
  • Casters are included for easy movement
    What were we disappointed with?
  • No warranty
  • The tabletop is quite heavy
  • Add the table weight to the weight of supplies on the product’s shelves, and it becomes harder to adjust the height
?
Consumer Engagement
Chosen by 3912 people in the past 30 days
9.7
Customer Feedback
Customer Feedback
9.6
Brand Reputation
Based onweb analytics
9.4
Features & Benefits
Product Review
9.2
9.7
Features
  • Dimensions: 70 ⅝” W x 59 ⅞” D x 29 ½” H (open)
  • Weight: 67 pounds
  • Weight limit: 55 lbs.
  • Construction materials: melamine laminate, MDF, and composite
  • Warranty: 10 years limited

Other features: three-position hydraulic lift, 33 spool holders, a large drawer and door tray

The Arrow K8405 Wallaby II Kangaroo Crafting Cabinet and Table is quite an expensive purchase. As such, anybody looking to buy this product would be hoping to get great value for money. Nonetheless, it is improbable that you will be disappointed.

Of course, for the price, you pay the lifetime warranty is almost to be expected. Nevertheless, there are some limitations on how you should use the cutting table if you hope to use it for long. Among them is, of course, the weight limit, which stands at 55 lbs.

Also, there is a slot for your sewing machine to be attached to the cutting table. As such, you should account for the weight of your sewing machine as well.

The hydraulic airlift that supports the sewing machine is another thing to write home about. It also has three variable positions that you can choose from depending on how you are using the table. You can even tuck the machine under the table as you are closing for the night.

Also, you have tiny shelves with spool holders included in the design. These are not just there for show. In addition to the drawer and door tray, they provide you with space to store all your accessories.

Additionally, the doors close and lock so you can leave all your materials hidden under the surface for later use.

    What makes it special?
  • Incorporates storage space for accessories
  • Doors close for more compact storage of the cutting table
  • Hydraulic lift caters to different size sewing machines
    What cons did we find?
  • The cutting table is pricey
  • Putting the table together has been quite a hassle for some previous users
  • Also, the assembly instructions leave a lot to be desired
?
Consumer Engagement
Chosen by 6161 people in the past 30 days
9.4
Customer Feedback
Customer Feedback
9.3
Brand Reputation
Based onweb analytics
8.9
Features & Benefits
Product Review
9.2
9.4
Features
  • Dimensions: 60.25W x 23.75D x 29.25H (open)
  • Weight: 48 lbs.
  • Weight limit: 75 lbs. (main top), 25 lbs. (side shelf)
  • Construction materials: heavy gauge steel, fabric
  • Warranty: 10 years limited

Other features: adjustable desk shelf, three fabric drawers

Buyers can as well benefit from owning the Sew Ready Eclipse Hobby Sewing Center Sewing Craft Table. Of course, the 10-year warranty will probably serve as more of a reason to buy this cutting table. Nevertheless, additional benefits are to be expected as well.

One of these benefits is the presence of three fabric drawers. However, you can use them to house extra accessories as well. After all, there are no rules against it, and as the owner, you have the right to use them however you want.

The construction is as well a noteworthy part of the device. The heavy-gauge steel, for instance, is quite durable and capable of carrying more weight. As such, it shouldn’t come as a surprise that the craft table can host 75 lbs on the main table and an additional 25 lbs on the side shelf.

Let us not forget that the side top can be folded down if you don’t need it. When it comes to storage, this is a bonus since the table will take up even less space.

Also, the three fabric drawers included are quite impressive as well. You can use them to sort your materials, fabrics and accessories. There is an adjustable desk shelf that adds to the potential benefits as well.

    What stands out?
  • Adjustable shelf
  • Fabric drawers included
  • Heavy gauge steel construction
  • Fold-down side table
  • Large weight limit
    What cons did we manage to find?
  • Some users have complained about the assembly process
  • Some of the products also arrive damaged due to bad shipping
  • No casters for more effortless movement of the device
?
Consumer Engagement
Chosen by 9823 people in the past 30 days
9.2
Customer Feedback
Customer Feedback
8.9
Brand Reputation
Based onweb analytics
8.8
Features & Benefits
Product Review
8.9
9.2
4
Features
  • Dimensions: 55.8″ L x 19.7″ W x 30.5″ H
  • Weight: 41.7 lbs.
  • Weight limit: n/a
  • Construction materials: MDF
  • Warranty: n/a

Other features: adjustable shelf, dual storage bins, five rolling wheels (2 lockable)

Another highly rated product is the Giantex Folding Sewing Craft Table. As you can see, a lot of storage space is included in the table for your materials. This is inclusive of the adjustable shelf, and dual-storage bins.

Additionally, your purchase comes with five rolling wheels. Two of these can be locked so that the table remains stationary while you work. Also, it can be folded to take up less space if you are done with it for the day.

All you would need to do is pair it with the right sewing machine to make your work much easier.

    What stands out?
  • Lots of storage space for accessories
  • Foldable
  • Adjustable shelf included
  • Five wheels for smooth movement with two of them being lockable to add stability
    What cons did we manage to find?
  • Assembling the table can be a handful
?
Consumer Engagement
Chosen by 9815 people in the past 30 days
9.1
Customer Feedback
Customer Feedback
8.8
Brand Reputation
Based onweb analytics
9.0
Features & Benefits
Product Review
8.9
9.1
Features
  • Dimensions: 31.5” W x 19” D x 29.5” H
  • Weight: 50 lbs.
  • Weight limit: 30 lbs. (top), 20 lbs. (folding top), 15 lbs. (each shelf)
  • Construction materials: MDF, melamine
  • Warranty: n/a

Other features: side shelves, rotating lockable casters, a fold-down leaf

The primary construction materials for this table are MDF and Melamine. Nevertheless, the tool does hold its own in the weight capacity department. On the top, you get 30lbs weight limit with an additional 20 lbs being supported by the folding top.

Shelves also, take about 15 lbs each. As such, if you evenly distribute your materials on these surfaces, you have nothing to worry about.

One can also take note of the fold-down leaf. Once you are done using the cutting table, you should make use of this feature to create more space around the structure.

Also, for easier movement, you get rotating casters. These as well need sometimes to be locked so that you can go about your sewing activities without any distractions.

    What do we love it for?
  • Large weight capacity
  • Locking casters included
  • Fold-down leaf on the side of the table
    What were we disappointed with?
  • Assembly can be a hassle since the instructions are only pictures
Also Product Ranking:
?
Consumer Engagement
Chosen by 7550 people in the past 30 days
8.9
Customer Feedback
Customer Feedback
8.6
Brand Reputation
Based onweb analytics
8.7
Features & Benefits
Product Review
8.5
8.9
Features
  • Dimensions: 60” x 36” D x 30.25” – 39.25” H
  • Weight: 66 lbs.
  • Weight limit: 50 lbs. (center/bottom panels); 25 lbs. (side panels); 15 lbs. (baskets)
  • Construction materials: n/a
  • Warranty: 10 years

Other features: adjustable height (30.25″ – 39.25″), multi-use, six casters for mobility, two slide-out mesh drawers

Another suitable option you could go for is the Sew Ready Studio Designs 13374 Folding Cutting Table with Drawers. The table has a design similar to a few other products on the list, including the Offex Rolling Folding Fabric Cutting Table and the Sullivans 38431 Home Hobby Adjustable Height Foldable Table.

As well this is quite a large cutting surface and will thus be suitable for a variety of jobs. If you are not using the table, you can fold it up and put it in a corner. This will reduce the space it takes up in storage.

Also, the casters are there for the mobility of the table. When you’ve opened up the table, you can lock the casters in place, and that will help give you stability as you work.

The slide-out mesh drawers are as well useful when working as they store some of your supplies. Nevertheless, a 50 lbs weight limit has been imposed on the device.

Some individuals, especially those planning to share the device with other people in their household, will as well appreciate the adjustable height.

    Why are we impressed?
  • Adjustable height
  • 10-year warranty
  • Casters are included with a lock feature
  • Storage space included
  • Easy setup
    What negatives must you be aware of?
  • Some users have mentioned that the legs are wobbly
  • Height adjustment may be challenging to some
?
Consumer Engagement
Chosen by 9722 people in the past 30 days
8.8
Customer Feedback
Customer Feedback
8.3
Brand Reputation
Based onweb analytics
8.7
Features & Benefits
Product Review
8.4
8.8
Features
  • Dimensions: 58.75″ W x 36″ D x 30.25″ – 39.25″ H (open)
  • Weight: 69 lbs.
  • Weight limit: 50 lbs. (center/bottom panels), 25 lbs. (side panels), 15 lbs. (wire drawers)
  • Construction materials: metal, MDF and plastic
  • Warranty: n/a

Other features: grid with inches and centimeters on top panels, two slide-out mesh drawers, six casters with four lockings, coated frame

Those looking for a simpler working table may end up picking out the Offex Rolling Folding Fabric Cutting Table. However, the design is quite similar to that of the editor’s choice. This is seen especially in the metal frame.

A point to note is that this table’s frame is powder-coated for added durability and to prevent rust. Also, at the bottom of that steel frame, you find that six casters are included. These serve to easily move the table from place to place inside your workshop should the need arise.

As well the casters can be locked into place to prevent any wobbling while you use the device. The top part is mostly made of MDF and plastic. Nonetheless, these components should prove sufficiently durable for most cutting jobs you might think of.

There is also a bit of storage space included in the product. This is in the form of the slide-out mesh drawers. Nevertheless, always try to keep the weight of the materials under 50 lbs.

Another benefit of the tool is the grid on the cutting surface. It provides inch and centimeter measurements as well.

    Why did it make our list?
  • Foldable
  • Has locking casters
  • Slide-out mesh drawers
  • Grid with various measurements is included
    What is not ideal about it?
  • Only has a fixed height
  • The weight limit is quite small
?
Consumer Engagement
Chosen by 8981 people in the past 30 days
8.7
Customer Feedback
Customer Feedback
8.3
Brand Reputation
Based onweb analytics
8.5
Features & Benefits
Product Review
8.3
8.7
8
Features
  • Dimensions: 40″ W x 19 ¾” D x 28 ¼” H
  • Weight: 35 lbs.
  • Weight limit: 35 lbs.
  • Construction materials: melamine/MDF, steel
  • Warranty: 3 years limited

Other features: adjustable two-position manual lift, collapsible legs

The Arrow 601 Gidget I Sew-Much-More Folding Craft Table is a simply-designed cutting table that is from the same manufacturer as the premium pick. It features two collapsible legs the work surface and a sewing machine platform.

Nevertheless, it is quite small as compared to other craft tables on the list. That and the fact that it has minimal parts is probably why it comes fully assembled.

Also, it comes with a sewing machine dock. However, it limits machines used to those that are 17-1/2” long by 7-3/8” deep or smaller. This is because bigger machines will not fit in the dock.

Nonetheless, one of the benefits is that the platform is adjustable to cater to different machine heights. Some users may not be too impressed by the 35 lbs weight limit. However, if you choose this device, you are going to have to be content with that.

Also, the collapsible legs are bound to come in handy when you want to store the table. Another benefit is, of course, the 3-year warranty.

    What makes it stand out?
  • 3-year warranty
  • Collapsible legs
  • Adjustable machine platform
  • Compact
    Which disadvantages must you keep in mind?
  • The cutting surface might be a bit small for some
  • 35 lbs weight limit is not much
?
Consumer Engagement
Chosen by 7704 people in the past 30 days
8.6
Customer Feedback
Customer Feedback
8.5
Brand Reputation
Based onweb analytics
8.2
Features & Benefits
Product Review
8.4
8.6
9
Best Compact Cutting Table

Sewing Rite SewStation 101 Cutting Table

Features
  • Dimensions: 40” W x 19.75” D x 28.25” H
  • Weight: 27 lbs.
  • Weight limit: 35 lbs.
  • Construction materials: steel, melamine
  • Warranty: n/a

Other features: 5.5 square feet of surface space, foldable

Another foldable fabric cutting table that you can choose to purchase is the Sewing Rite SewStation 101 Cutting Table. It is a relatively small and lightweight table and, as such, will take up minimal workspace.

Most of the two-legged frame is made of steel while the top is made of melamine. Nevertheless, it does come with a 35 lbs weight limit, which you should strive to adhere to.

Also, it has an ample 5.5 square foot cutting space. When it comes to storage, the fact that it folds is quite convenient and saves space. Another benefit is that you can use the edge of the table to measure fabrics.

It is, however, disappointing that the table doesn’t come with a warranty. Nevertheless, some people will still be content to take it as it is.

    What makes it stand out?
  • Foldable and doesn’t take up much space
  • No assembly required
    Which disadvantages must you keep in mind?
  • No warranty
  • The adjustable platform doesn’t cater to all machine sizes
?
Consumer Engagement
Chosen by 3141 people in the past 30 days
9.6
Customer Feedback
Customer Feedback
9.5
Brand Reputation
Based onweb analytics
9.3
Features & Benefits
Product Review
9.2
9.6
Features
  • Dimensions: 63 ¾” W x 19 ¾” D x 30 ½” H (open)
  • Weight: 48.4 lbs.
  • Weight limit: n/a
  • Construction materials: vinyl, laminate, MDF, composite
  • Warranty: 10 years limited

Other features: airlift, four drawers, two fold-out leaves

If you want a cutting table with a sewing machine slot as well as an adjustable surface size, then this product is for you. The Arrow 900 Auntie Cutting Portable Sewing Table comes in three available finishes. The first one is the oak one pictured above. There is also a black option and a white one as well.

As you can see, the product is designed to look more or less like a small office desk. As such, when it is closed, you can place your laptop on it, find a chair then work away at some project or other.

Nevertheless, it does have quite a large surface for cutting on the left side of the tool. However, this is only if you open it up fully.

A similarity between this product and the Arrow K8405 Wallaby II Kangaroo Crafting Cabinet and Table is the hydraulic airlift. Of course, this component has the same purpose as that of the predecessor, which is to support various sewing machines.

Another impressive feature is the inclusion of four drawers. These should go a long way in ensuring everything you need while sewing is within reach.

Also, the warranty is worth noting. You get ten years of limited coverage, which serves to incentivize the purchase. Nevertheless, you get the table for about half the price of the predecessor. As such, more people will likely go for this option.

    What are our favorite features?
  • Usable as a desk
  • 10-year warranty
  • Four drawers are included for storage
  • Hydraulic airlift included for the support of sewing machines
  • Adjustable surface size with the fold-out leaves
    What could be better?
  • Similar to its predecessor most users will find it difficult to assemble
  • The hydraulic airlift is also hard to use


Things to Consider

Navigating the market is tricky, and often you find people buying products that they have to return later on. If you are looking to avoid this with regards to fabric cutting tables, you can do so by reading the buying guide below.

Benefits of fabric cutting tables

10 Best Fabric Cutting Tables to Make Your Sewing Work Much Easier

As it stands, the benefits of fabric cutting tables will vary from model to model. Some common benefits include foldable designs for easier storage as well as the inclusion of platforms for sewing machines.

In select models, you find adjustable height as an option as well as measurements indicated on one of the edges of the table. This helps you make precise cuts where need be.

Also, some of the tables come with storage space for extra materials.

Features to consider when choosing a fabric cutting table

Of course, if you want the best fabric cutting table for your needs, you can judge its suitability by checking the features. The fact that fabric cutting table features are explained in detail below may also be of immense benefit.

Dimensions

Concerning dimensions, there are a few surfaces you need to consider. A tool like the Offex Rolling Folding Fabric Cutting Table, for example, requires you to consider the top dimensions. In addition to that, the side shelf size also needs to be put into account. Also, checking the size of the mesh drawers can help you determine the size of the materials you can put there.

Weight

The weight of the overall device as well matters in case you want to move the table. Remember that the weight is inclusive of the top, side shelves and drawers.

If the table comes with wheels such as the Southern Enterprises Eaton Craft Station Sewing Table, it is even better. This, of course, is because you will be able to move it quite easily, even with a sewing machine and extra materials on top of it.

Construction materials

10 Best Fabric Cutting Tables to Make Your Sewing Work Much Easier

Often if you want to know how long a tool will last after purchase, you will look at the construction materials. Also, high-quality construction materials have often been associated with several additional benefits.

One example is the Sew Ready Eclipse Hobby Sewing Center Sewing Craft Table. With its heavy-gauge steel construction, it is almost expected that it can handle a weight of up to 100 lbs.

Weight limit

As we have mentioned above, tables with more robust construction materials can handle more weight. However, you need to decide how much weight you think your cutting table should support.

Of course, the above will be dependent on how you plan to use the device, and maybe the sewing machine you own. Nevertheless, you have the Sew Ready Eclipse Hobby Sewing Center Sewing Craft Table that can handle 100 lbs. In contrast, there is the Arrow 601 Gidget I Sew-Much-More Folding Craft Table that can only handle 35 lbs.

There are as well a few other weight limit options in between these two, and as such, you need to come up with a decision on the same.

Warranty

Products like the Sew Ready Studio Designs 13374 Folding Cutting Table with Drawers will always have the edge over some of the competition due to the guarantees they feature. They represent a lot more value for money since you don’t have to worry about table damage for the first few years. Nevertheless, always make sure to read the warranty terms in full, so you know what you are and aren’t covered against.

Other features

Features such as rotating lockable casters may not be essential to the workings of the table. However, they do help to make your work easier in some scenarios. As such, this is one of the areas you should check in addition to any extra features you might find in a potential purchase. Generally, the more the additional features, the better for you.

FAQ

What is a cutting table?

As seen from the images provided above, cutting tables have long surfaces and, in a few cases, have grooves to accommodate scissors. They consequently make cutting into fabrics so much easier. This, of course, is their primary purpose, hence why they are designed around such functionality.

Also, in a few select options, you have a built-in yardstick that should help with taking fabric measurements.

How big should a sewing cutting table be?

Some experts seem to think that a cutting table should be about four feet high. Also, the length and width need to be around 6 x 3 feet. Nevertheless, this is only a guideline, and as seen from the options above, most manufacturers tend to deviate from this.

Our verdict

After reading the above, you should already know some of our favorites. The Sullivans 38431 Home Hobby Adjustable Height Foldable Table, for instance, has a large cutting surface. It as well features adjustable height and even shelves that make your work easier.

Most of our team also consider the Arrow K8405 Wallaby II Kangaroo Crafting Cabinet and Table top-notch both in outlook and features. Some of its more impressive aspects include the hydraulic lift drawer and even spool holders. Nevertheless, it was knocked out of first place by the high price point.

A more affordable option from the same manufacturer and our third favorite is the Arrow 900 Auntie Cutting Portable Sewing Table. One area where the predecessor has an edge is in the surface space. Nevertheless, it should be enough for some of you to work with.

Of course, the process of logging onto Amazon and purchasing one of these products should now be stress-free after taking in all the above information.

9,8
Total Score
Sullivans 38431 Home Hobby Adjustable Height Foldable Table - Editor’s Choice
Leave a comment

Your email address will not be published. Required fields are marked *

X