3 Best Industrial Sergers For Productive Sewing Business

By
Jean Chaney
Jean Chaney
Research Writer
Jean is the brains behind her fashion label. She's a whiz with a needle and thread, and has been sewing since she was old enough to hold a pair of scissors. Jean has always read more
reviewed
Reviewed By
Isabel Misner
Isabel Misner
Expert Consultant
A professional seamstress. Isabel has her own video blog where she shares her experience about all the aspects of sewing – from choosing suitable materials to step-by-step read more
Last updated: August 12, 2023
JustToSew is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

Whether you’ve just gotten into the wide world of sewing or you’ve caught up on the basics and want to get a bit more intricate—especially if you’ve begun to make a profit from your new hobby—the best industrial serger can give you the very professional seam you’re looking for. A serger, or an overlock machine, is a sewing machine that specializes in edging, seaming, and hemming a large variety of fabrics and products. You’ll most likely see one of these machines in a furniture upholstery factory or a clothes manufacturer.

These industrial sergers run with speeds from 1000 to even over 9000 rpm, which is extremely fast! Since you can use these kinds of speeds in different businesses, like construction, reinforcement, and decoration, the machines are extremely versatile—making it the perfect go-to machine for any industry. The stitches also stretch with the fabric, making it highly practical with most jobs, locking completely around the seam so that there’s no fraying upon job-completion or in the future.

In this article, we’re going to go through our hours of research and present you with some information that can help you pick out the best industrial serger for your business. From our comparison table to the in-detail reviews of each product—with features outlined, such as sewing speed, stitch length, and the number of needles and threads—to our buying guide, we hope this article helps you pick out the best product for your situation.

Quick Summary

  • Editor's Choice: JUKI MO-6714S
    "A powerful industrial serger with 2 needles and 4-threads capacity and automatic lubrication for easier maintenance"
  • Quietest Industrial Serger: Juki MO-6716
    "A quite automatically lubricated industrial serger with powerful motor and easy threading mechanisms"
  • Budget Pick: Yamata FY747A
    "Quiet budget-friendly industrial serger with 3-thread capacity and two needles for quick and productive sewing "

Top 3 Industrial Sergers Review 2024


?
Consumer Engagement
Chosen by 5793 people in the past 30 days
9.9
Customer Feedback
Customer Feedback
9.7
Brand Reputation
Based onweb analytics
9.4
Features & Benefits
Product Review
9.8
9.9
1
Editor's Choice

JUKI MO-6714S

Features
  • Sewing speed: 7000 spm
  • Stitch length: 4 mm
  • Number of needles: 2
  • Number of threads: 4

More features: needle-thread take-up mechanism, looper thread take-up mechanism, 7 mm presser foot, automatic lubrication

The JUKI MO-6714S is our best all-around serger. With speeds from 7000 stitches per minute onward, you can definitely rely on this serger to get the job done. The JUKI MO-6714S works with a stitch length of the range being from 0.8 to 4 mm.

It functions using two needles and 4-thread count and is backed by one of the world-leading brands in the industry: Juki.

The JUKI MO-6714S uses 110V with an industrial clutch motor and also operates using a DC X 27 needle. Intended solely for overlock stitching of light to medium weight fabrics, this is the perfect machine to get your one-stop project done and perfected.

With its various features, needle-thread take-up mechanism, looper thread take-up mechanism, 7 mm presser foot, and automatic lubrication, it really is top of its class and on the market. The JUKI MO-6714S is designed to perform at high speed with reliability and consistency, which is perfect for business.

It is also highly versatile, compatible with a wide range of fabric types, from stiff to stretchy. It also comes as a complete unit: with the machine head, table, stand, motor, sewing light, drawer, and all necessary components installed and ready to sew.

    Why is it special?
  • Speeds up to 7000 spm
  • Needle-thread take-up mechanism
  • Looper thread take-up mechanism
  • Automatic lubrication
    What are the flaws?
  • Produces a ton of noise
Also Product Ranking:
?
Consumer Engagement
Chosen by 2870 people in the past 30 days
9.6
Customer Feedback
Customer Feedback
9.5
Brand Reputation
Based onweb analytics
9.1
Features & Benefits
Product Review
9.2
9.6
2
Quietest Industrial Serger

Juki MO-6716

Features
  • Sewing speed: 7000 spm
  • Stitch length: 4 mm
  • Number of needles: 2
  • Number of threads: 5

More features: 3450 rpm clutch motor, needle-thread take-up mechanism, looper thread take-up mechanism, automatic lubrication

The Juki MO 6716 has everything you need for industrial sewing success. With a fully-assembled table included, as well as a servo motor, you can tackle any project founded on any material.

Tailored and perfected in delicate and beautiful soft-to-the-touch seams, the Juki MO 6716 operates as one of the most silent industrial sergers on the market—delivering skill and quality without all the noise. This reduction in noise also increases the durability and life of the machine.

The Juki MO 6716 comes with a needle-thread take-up mechanism and a looper thread take-up mechanism, you can work on light OR heavy-weight materials while still maintaining flexibility in material elasticity.

The Juki MO 6716 reaches sewing speeds up to 7,000 spm and is also compatible with other conventional Juki machines, which is what makes this brand great. This machine also comes with upper and lower needle bar bushings, which helps enhance the durability of the needle bar unit. It also comes with a cartridge type oil filter and cooling fan.

    What do we love it for?
  • Great selection of wool thread included
  • Makes almost no noise when operating
  • Speed gets up to 7,000 spm
    What were we disappointed with?
  • The embroidery might not read the sticks
  • Only available in highest number of bobbins for order

?
Consumer Engagement
Chosen by 4925 people in the past 30 days
9.1
Customer Feedback
Customer Feedback
8.6
Brand Reputation
Based onweb analytics
9.0
Features & Benefits
Product Review
8.9
9.1
3
Budget Pick

Yamata FY747A

Features
  • Sewing speed: 6000 spm
  • Stitch length: 4 mm
  • Number of needles: 2
  • Number of threads: 3

More features: 3000 rpm servo motor, assembly required, 1 year warranty on motor, 6-months on head

The Yamata FY747A is our budget pick for the best industrial serger on the market. Even though it’s a little bit more affordable than the other two, it still has high-quality, industry standard capabilities.

Included with the 6,000 spm serger is also the fully submerged table and the servo motor. On the servo motor, you can reach up to 3000 rpm, which is backed by a 1-year warranty to keep you going fast for longer. The head is backed by a 6-month warranty.

If you’re looking to work on over-edging pieces using materials that are both lightweight or medium-weight, the low-sewing tension and neat stitches work seamlessly on the Yamata FY747A.

This machine also features its own automatic lubricating device, which operates smoothly when set to low-sewing tension. The Yamata FY747A, although listed at a budget bargain price, has all the basic range of functions. All parts included in the setup have been industry-standard optimized for economical and efficient machine performance.

    What makes it special?
  • It is heavy and sturdy
  • At budget price but able to get the job done without lacking in quality
  • Quiet Servo motor
    What cons did we find?
  • Not sent in original box, so had some oil leak out
  • Operates smoothly just on low-sewing tension


Things to Consider

If you’re looking for the industry-standard best industrial serger, this buying guide can help you focus on the side-by-side features of each of the products listed above. We hope that our buying guide helps you sew through the ins and outs of sergers so you are well-informed before you buy.

Sewing serger is what your business needed

Whether you work construction, manufacturing or in the clothing industry, the serged seams produced by industrial sergers are not only flawless and seamless, the stretch out so much more than the conventional sewing machine seam.

Especially when you are working with knit or other stretchy fabrics, you’ll definitely be able to benefit from it.  Whether you want to finish seams, create special hems or lay out edgings, a serger can definitely be what you’re looking for and what your business may need.

Features to consider while buying the right industrial serger for your business

Whether you are multi-million dollar corporation or a startup business, finding the right serger for you can thread back down to the small details. Each feature in these sergers can make the ultimate difference between the perfect pick and a sewing disaster.

3 Best Industrial Sergers For Productive Sewing Business

Take a look at these features to help you pick out which are most important for you:

Motor options

This where most of the sergers will differ from one another. There are so many options available in the industrial sewing machines on the market. However, sorting out what you need is as simple as figuring out the ideal speed.

You will be able to choose from:

  • A Fixed-Speed Clutch Motor: Operate on a fixed speed between (usually( 1700-3500 rpm).
  • An Adjustable-Speed Servo Motor: Operate on an adjustable speed that you can control. These are often much quieter than the fixed speed motors. They also consume almost 100% less energy than the other motor and are much lighter.

Speed

37391680bc9f48be9430b9d8ecff9325The main advantage to a serger is that they sew fast. However, quality responsive foot control is what truly makes a difference—this will actually be able to help you slow the job down when you need to and control the speed with much more precision.

Industrial sergers will have a speed control lever on the head of the serger, which will be easy-to-use and computerized on most models

Sergers are also highly beneficial on bursts of speed, which can normally be controlled by the foot-control, meaning that feature is definitely a must in an industrial serger.

Threads

The overlock stitches are normally identified by the number of threads. Normally, they go from 1-5.

When you’re working with a 1-thread, you should be focusing on end-to-end seaming or “butt-seaming” with textile material.

When you’re working with 2-thread—which is the most common—you should be focusing on edging and seaming with knits and wovens. You can also stitch flatlock, elastic, lace, lingerie, and hemming.

When you’re working with 3-thread you should be focusing on sewing pin tucks, narrow-rolled hems, fabric edges, edging, and seaming with knit or woven fabrics.

When you’re working with 4-thread, like the Juki MO-6714S, you should be focusing on edging, finishing, seaming high-stress areas, and needing flexibility with strength.

When you’re working with 5-thread, like the Juki MO-6716, you should be focusing on apparel manufacturing and safety stitches.

Needles

mo-6716s1The needles are also an important part of an industrial serger. Of course, you’ll want to make sure that you are using what the manual of the product recommends—like the Industrial Standard Sewing Machine Needles. Especially since the machine gives off a lot of heat and wears down on the needle, the industrial speeds can break the needle and possibly the machine.

Durability

You’ll want the machine to last as long as it can—especially if you are investing in an industrial serger for your business. Check the reviews of previous buyers to see how long it has lasted while working regularly. You’ll also want to check the warranty behind the serger, even our budget pick, the Yamata FY747A has a 1-year warranty on the motor.

Additional mechanisms

After all that’s said and done, you might end up with a pretty high-quality industrial serger. But what else is there?

Some additional mechanisms included within the industrial serger are differential-feed micro-adjustment mechanisms and external adjustment mechanisms. These are used for changing up the feed dog incline and also raising the differential feed ratio. This will help match the speed with the material.

A micro-lifter feature can also help improve the responsiveness to materials and reduce the operating noise and vibration.

Warranty

As we mentioned before, the warranty is extremely important—as it is with any electrical machine. Although not stated here for the other two industrial sergers, the Yamata FY747A comes with a 1-year warranty on the motor and a 6-month warranty on the head.

FAQ

How to oil an industrial serger?

When oiling an overlocker, you’ll want to take note that it will not be the same as oiling your sewing machine. It also won’t be the same type of oil! This oil will attract the lint and debris on the interior of the machine, while also eliminating any grime inside, which improves performance.

You should be oiling your machine every 4-6 months. Normally, the manual will come with specific how-to directions since each machine is different. You’ll also get to know your machine after a while.

On the industrial serger, you’ll want to focus on oiling the looper shaft at the two points where they are most dry.

How to assemble an industrial serger?

For the foot pedal on the servo motor, you’ll want to make sure it is installed so that the three basic foot positions are available and in place. Normally, from the get-go these machines are nearly always threaded. You will then, before operating, have to change threads on an industrial by clipping the thread at the spindle—don’t pull it out—and knot it on the new thread.

Once that is done, unthread the needle, let the presser foot lift up and then gradually bring the thread through the channels, which should be running from the bottom.

Wait until the knot feeds through. Once that’s done, you can clip it and then rethread, using a reading direction—from left to right. The thread tail of the bobbin should form a “9” before inserting it into the bobbin case to keep it straight.

Our verdict

Since we only have three products to work with here, we’ll give you a review of all of them again—our best industrial sergers again, so you know exactly what you’re getting:

The Juki MO-6714S is our best all-around serger. It not only reaches speeds up to 7000 stitches per minute, but you can also work with the 4-thread count, making it extremely versatile. Backed by one of the world-leading brands in the industry, it comes with a variety of features including a needle-thread take-up mechanism and a looper thread take-up mechanism, as well as a 7 mm presser foot and automatic lubrication.

The Juki MO-6716 is one of the quietest industrial sergers around. Although it is minuscule in noise, it is grand in power—with a sewing speed equivalent to our best all-around serger, at 7000 spm. The Juki MO-6716 also comes with five threads, which is the highest number of all three of our sergers, allowing for much more versatility in your projects. It also features a 3450 rpm clutch motor, needle-thread take-up mechanism, looper thread take-up mechanism, and automatic lubrication.

The Yamata FY747A is our best budget pick for industrial sergers. Regardless of affordable price, it still has a sewing speed of 6000 spm and a 3000 rpm servo motor. The Yamata is also backed from the manufacturer with a 1-year warranty on the motor and a 6-months one on the head.

Whether you’re picking from one of our top three choices or have gone with your own, we hope that this article has broadened your options and given you the guidance you may need to narrow down your search. Our guide should have helped you pick out the best industrial serger for you and your business—please let us know if you have any more questions on this matter! We wish you happy sewing!

9,9
Total Score
JUKI MO-6714S - Editor's Choice
2 comments

Would you know if the Juki MO 6714S that you used had a clutch or servo motor? I’m just wondering why it was noisy. I’m on the hunt for something that can handle 8+ hours of daily serging while staying quiet enough not to disturb the neighbors in my little apartment.

Hello, Liz. The Juki MO 6714S serger has a servo motor and it should deliver a quiet performance if set right. Various problems with the noise might be caused by an unstable slate settlement due to poor tuning. It can be fixed by applying thicker grease to the inner gears.
If anything, there’s an option of Juki MO-6716, that is fairly quiet compared to the rest, but won’t really be a soundless device, so you might want to warn the neighbors about the slight noise.

Leave a comment

Your email address will not be published. Required fields are marked *

X